Social Networks

News

application_areas.png October 09-11, 2024 

The TECHNO-CLS consortium workshop was organized with the aim of presenting the current progress achieved within the project and widening the TECHNO-CLS links with industrial companies relevant to the project. The event will take place on October 09-11, 2024 at the Hellenic Mediterranean University, Crete, Greece.

 

 

 

October 2024
Conceptual paper: G. B. Sushko, A. V. Korol, and A. V. Solov’yov, Intense gamma-ray light sources based on oriented single crystals, Phys. Rev. Accel. Beams 27 (2024) 100703.

In this paper, the feasibility of gamma-ray light sources based on the channeling phenomenon of ultrarelativistic electrons and positrons in oriented single crystals is demonstrated using rigorous numerical modelling. Case studies are presented for 10 GeV and sub-GeV electron and positron beams incident on thick (up to few millimeters) diamond and silicon crystals. It is shown that for moderate values of the beam current (≤10 microamperes), the average photon flux in the 1-200 MeV energy range emitted within the narrow cone and bandwidth can be in the order of 1010 photons/s for electrons and 1012 photons/s for positrons. These values are higher than the fluxes available at present.

September 08-13, 2024
Talk "Silicon Crystalline Undulator Based On Silicon Nitride Stressor Layer Patterning: Design and Building from TECHNO-CLS Project" at the 10th Intnl. Conf. "Charged & Neutral Particles Channeling Phenomena", Riccione, Italy. Lorenzo Malagutti (on behalf of the INFN, UNIFE, UNIPD and MBN-RC teams)

Abstract: Current limitations in the field of undulators include the inability of state-of-the-art magnetic undulators to achieve periods shorter than a few centimeters. To overcome these limitations, Crystalline Undulators (CUs) consist of periodically bent crystals in which channeled electrons or positrons follow the bending of the crystalline planes must be developed. These CUs aim to generate intense and monochromatic sources of hard X and γ electromagnetic radiation with energies from 100 keV to GeV. In this work, we present a novel approach exploiting silicon nitride stressor layer to produce short period CUs. We report the results of finite element method (FEM) analysis of CUs and the evaluation of the optimal geometric parameters for the undulator, revealing detailed 3D deformation and the related emitted radiation spectrum. Additionally, dynamic simulations were conducted using the relativistic atomistic molecular dynamics approach implemented in MBN Explorer. We fabricated first prototypes of CUs using advanced silicon microelectronics techniques, facing significant challenges from an experimental manufacturing perspective.

April 09, 2024
The workshop of the TECHNO-CLS consortium was organized by MBN Research Center within the framework of The Eight International Conference "Dynamics of Systems on the Nanoscale" ( DySoN2024). The event took place on April 09, 2023 at Tbilisi State University, Tbilisi, Georgia. Most of the TECHNO-CLS partners participated in the meeting and presented the current progress achieved within the project, as well as its further goals.

A program of the TECHNO-CLS workshop can be found here.

February 26, 2024
The coordination consortium on-line meeting was organized by MBN Research Center. All the TECHNO-CLS partners participated in the meeting. The following main topics were discussed:

  • Rolling plans for the year II and the preparation of the annual report for the European Commission
  • Meeting at the DySoN-MultIChem 2024 Conference in Tbilisi, Georgia, April 08-12, 2024
  • TECHNO-CLS consortium meeting at Crete, October 10-11, 2024
  • Upcoming TECHNO-CLS deliverables

October 05-06, 2023
The TECHNO-CLS consortium workshop was organized with the aim of presenting the current progress achieved within the project and widening the TECHNO-CLS links with industrial companies relevant to the project. The event took place on October 05-06, 2023 at the University of Ferrara, Italy. 

For details, see the link. 

The meeting agenda can be found : here.

June 29, 2023
The coordination consortium on-line meeting was organized by MBN Research Center. All the TECHNO-CLS partners participated in the meeting. The following main topics were discussed:

  • Preparation of the first year periodic report
  • Preparation for the project review meeting

April 26, 2023
The The workshop of the TECHNO-CLS consortium was organized by MBN Research Center within the framework of The Seventh International Conference "Dynamics of Systems on the Nanoscale" ( DySoN2023). The event took place on April 26, 2023 at the Villa Lanna in Prague, Czech Republic. All the TECHNO-CLS partners participated in the meeting and presented the current progress achieved within the project, as well as its further goals.

February 27, 2023
The coordination consortium on-line meeting was organized by MBN Research Center. All the TECHNO-CLS partners participated in the meeting. The following main topics were discussed:

  • Discussion of the rolling plans implementation by TECHNO-CLS partners;
  • TECHNO-CLS Workshop in frame of DySoN 2023 Conferences in Prague, April 24-26, 2023
  • 1st year evaluation in June-July 2023
  • TECHNO-CLS workshop in Ferrara, October 2023

December 19, 2022
The coordination consortium on-line meeting was organized by MBN Research Center. All the TECHNO-CLS partners participated in the meeting. The following main topics were discussed:

  • Implementation of tasks: Current status
  • TECHNO-CLS Data Base
  • Deliverables: DMP and PDE

September 30, 2022
Laura Bandiera presented a TECHNO-CLS Poster at 2022 European Researchers' Night at Research Night 2022.

September 13, 2022 The coordination consortium on-line meeting was organized by MBN Research Center.  All the TECHNO-CLS partners participated in the meeting. The following main topics were discussed:

  • TECHNO-CLS website newly created by the MBN-RC
  • Potential experiments within TECHNO-CLS that can be carried out at the Diamond facility, UK
  • The nearest (3-6 months) and the longer period (6-12 months tasks) tasks of the TECHNO-CLS teams within each TECHNO-CLS Work Package

July 22- 23, 2022
The kick-off meeting of the TECHNO-CLS project was held in Frankfurt am Main on July 22-23, 2022. The meeting was organized by MBN Research Center. The kick-off meeting comprised scientific presentations of the research groups involved in the project as well as a presentation on the project management and coordination issues, followed by a discussion. A program of the TECHNO-CLS kick-off meeting can be found here.